Additional information
| brand | Impala |
|---|
IMHPP Series Horizontal Polypropylene
₹100.00
IMPALA “IMHPP” Series pumps are heavy-duty, high-performance horizontal polypropylene pumps designed to handle highly corrosive and abrasive chemicals. Built for durability and chemical resistance, the IMHPP Series is ideal for applications in chemical processing, effluent treatment, acid transfer, and other demanding industrial environments. These pumps offer reliable operation, low maintenance, and excellent resistance to aggressive fluids, making them a preferred choice for corrosive liquid handling.
Range
| Head Up To | 60 mtrs |
| Pump size | 25 mm to 150 mm |
| Capacity | 180 M3/hr |
| Speed | 1440/2880 rpm at 50 Hz & 1750/3500 rpm at 60 Hz |
| Temperature | up to 110c |
Application
- Water Treatment Plant
- Effluent Treatment
- Filter Press for dyes and chemicals
- Fertilizer Plants, Thermal and Atomic Power Plants
- Drugs & Pharmaceutical Industries
- Descaling of Tubes
- Scrubbing of corrosive gases like Cl, Br, I, SO2, NH3, F2, etc.
- Excellent for vacuum ejectors
- Transferring of concentrated HCL from road tankers
- Paper & Pulp Industries
- Pickling in steel rolling mills
- Caustic Soda Plants: Chlorinated Brine, Conc. HCL, Dilute H2SO4, etc.
- Phosphoric Acid Plants: H3PO4, H2SO4, HF, and their mixtures with or without solid (gypsum) up to 40% conc.
- Gas Washing Plants: Scrubbed liquids containing Cl, Br2, F2, I2, SO2, SO3, CO2, NH3, Gases, etc. with solids replace Hast Alloy.
- Rayon Plants: Spin bath solution (H2SO4, ZnSO4, NaSO4, etc.)
- Electroplating
Temperature Resistance
- PP 50 TO 80c
- PPH 90 TO 100c
- PVDF 100 TO 115c
Material Of Construction
- CASING: Top centerline discharge and integrated flanges, single-piece, jointless casing formed from injection molded polypropylene / PVDF / UHMWPE.
- IMPELLER: Hydraulically balanced and accurately matched to casing profile. The semi-open type impeller with particle shroud and glass-finished smooth flow passage ensures high efficiency and low NPSH performance. Impeller made from compressor-molded polypropylene, PVDF, or UHMWPE.
- SHAFT: Made from SS 304, protected by a shaft sleeve of Alloy-20, alumina-filled Teflon, or ceramic.
- BEARING HOUSING: Made from heavy-duty graded casting.
- BEARING: SKF ball bearing.
- MECHANICAL SEAL: Rotary part of the seal made from glass-filled Teflon, and stationary part made from high alumina-filled ceramic.
- DISTANCE PIECE: Heavy-duty one-piece injection-molded polypropylene.
