HomeShopPumpsChemical Process PumpsIMVGP Series Vertical Glandleless Pump
IMVGP Series Vertical Glandleless Pump
IMVGP Series Vertical Glandleless Pump 02

IMVGP Series Vertical Glandleless Pump

₹100.00

Buy now
Add to wishlist
ENQUIRY!
Categories: , Brand:

Additional information

brand

Impala

Range

  • PP: 50ºC to 80ºC
  • PPH: 90ºC to 100ºC
  • PVDF: 100ºC to 115ºC

Applications

  • Water treatment plants
  • Effluent treatment
  • Filter press for dyes and chemicals
  • Fertilizer plants, thermal and atomic power plants
  • Drugs & pharmaceutical industries
  • Descaling of tubes
  • Scrubbing of corrosive gases like Cl, Br, I, SO₂, NH₃, F₂, etc.
  • Excellent for vacuum ejectors
  • Transferring concentrated HCL from road tankers
  • Paper & pulp industries
  • Pickling in steel rolling mills
  • Caustic soda plants: Chlorinated brine, conc. HCL, H₂SO₄, etc.
  • Other applications in metal refineries, pickling installations, paper and fertilizer plants, and all chemical process industries
  • Phosphoric acid plants: H₃PO₄, H₂SO₄, HF, and their mixtures with or without solids (gypsum) up to 40% concentration
  • Gas washing plants: Scrubbed liquids containing F, Cl, SO₂, ammonia gases, etc. with solids replacing Hastelloy
  • Rayon plants: Spin bath solutions (H₂SO₄, ZNSO₄, NaSO₄, etc.)

Salient Features

  • No mechanical seal, stuffing box, or internal bearings needed
  • No maintenance required, as the pump can even run dry indefinitely (no packing, bushes, or internal bearings)
  • Reduction of downtime and production losses due to the features above
  • All wet-end parts are made of solid moulded construction to withstand corrosion and erosion
  • The impeller is a semi-open type, used in all vertical pumps to suit both clear and polluted fluids
  • The pump is mounted outside the suction tank and is not submerged
  • Polypropylene is manufactured by a solid injection molding process with high pressure

Material of Construction

  • Casing: Top centreline discharge and integrated flanges, single-piece, jointless casing formed out of injection-moulded polypropylene
  • Impeller: Hydraulically balanced and accurately matched to the casing profile, semi-open type impeller with practical shroud and glass-finished smooth flow passage to ensure high efficiency and low NPSH performance. Impeller made from compressor-moulded U.H.M.W.
  • Explorer: Made from U.H.M.W.
  • Overflow Body: Heavy-duty, one-piece, joint-less design made from compressor-moulded U.H.M.W.
  • Shaft: Made from SS 316, protected by a shaft sleeve of U.H.M.W.
MODEL HP X RPM PUMP SIZE HEAD IN METERS LPM DIA
6 10 12 15 20 25 30 35 40
IMVGP-25/1/2 1 X 2900 25 X 25 130 50 0 – – – – – – 110 MM
IMVGP-40/2/4 2 X 1450 50 X 50 75 – – – – – – DISCHARGE
IN
LITRE
PER
MINUTE		 150 MM
IMVGP-40/2/2 2 X 2900 40 X 25 250 150 100 – – – – – – 130 MM
IMVGP-50/2/4 2 X 1450 50 X 40 266 183 – – – – – – – 190 MM
IMVGP-50/3/4 3 X 1450 50 X 40 400 300 200 0 – – – – – 290 MM
IMVGP-50/3/2 3 X 2900 50 X 40 480 415 350 325 200 0 – – – 140 MM
IMVGP-50/5/2 5 X 2900 50 X 40 530 450 440 415 330 260 133 – – 150 MM
IMVGP-75/5/4 5 X 1450 75 X 65 – 500 430 400 160 – – – – 200 MM
IMVGP-75/10/2 10 X 2900 75 X 65 – 830 750 700 650 580 500 330 330 190 MM

Related products

Recently viewed products

Product Enquiry